Surface tensor estimation from linear sections

From Crofton's formula for Minkowski tensors we derive stereological estimators of translation invariant surface tensors of convex bodies in the n‐dimensional Euclidean space. The estimators are based on one‐dimensional linear sections. In a design based setting we suggest three types of estimators. These are based on isotropic uniform random lines, vertical sections, and non‐isotropic random lines, respectively. Further, we derive estimators of the specific surface tensors associated with a stationary process of convex particles in the model based setting.     

基于滑模趋近律的防空导弹垂直发射姿态控制研究

利用四元数在弹体坐标系下对垂直发射的防空导弹建立了运动方程,并在纵向通道利用小扰动线性化状态空间模型,设计了基于滑模趋近律的姿态控制律,最后建立了Simulink六自由度弹道模型并进行了数字仿真,结果表明：基于四元数的运动方程形式运行有效,基于滑模趋近律的姿态控制律可实现对防空导弹垂直发射的有效控制。     

一种基于并行混沌和SFLA的风电电网无功优化模型设计

针对已有方法在解决电网无功优化时,由于系统的无功不足和电网电压的不稳定,容易过早收敛到局部最优解的缺点,设计了一种基于并行混沌和混合蛙跳算法 (Shuffle Frog Leaping Algorithm, SFLA)的电网无功优化模型。首先,建立了最小化有功网损、最大化静态电压稳定裕度和最大化无功补偿单位投资收益的多目标数学优化模型,然后,对经典的SFLA进行改进,通过引入精英协同进化机制和划分种群的方式实现并行寻优,从而增加个体的多样性和加快最优解的求取速度,在不同种群中设计不同的适应度函数和个体更新进化方法。为了使得算法的初始解分布更为均匀,引入用混沌机制来对种群进行初始化,最后,对基于并行混沌和SFLA的总体算法进行了设计和分析。在Matlab环境下进行实验,实验结果表明文中方法得到的优化结果具有电网有功损耗小、单位投资收益高和静态电压稳定裕度大的优点,具有较强的可行性和适应性。     

线-铝箔电极电晕放电激励器的推力理论与实验研究

空气电晕放电离子风激励器无需旋转部件, 仅通过消耗电能就能直接产生驱动力, 它是一种新型的动力技术, 备受国内外航空航天界的广泛关注. 目前对空气电晕放电离子风激励器的推力产生机理虽有各种解释, 但是现有理论均不能统一各种条件下的实验结果, 仍需要开展进一步的分析与研究. 本文以线-铝箔电极电晕放电激励器为研究对象, 通过实验研究发现作用在线电极与铝箔电极上的静电力不对称, 而且改变铝箔电极纵向高度和气压均能影响激励器的推力大小; 通过理论分析, 考虑电晕层与空间电荷的影响, 建立了线-铝箔电极电晕放电激励器的推力计算模型, 其计算值与实测值比较一致. 基于上述实验现象与理论建模分析, 本文认为线-铝箔电极电晕放电激励器的推力主要来源于线电极电晕产生的空间电荷对电极系统产生了不对称静电力作用, 使激励器出现净静电力作用.     

电光调制对外部光注入垂直腔表面发射激光器的偏振转换及其非线性动力学行为的操控性研究

针对主和副垂直腔表面发射激光器构成的外部注入激光器系统的偏振转换及其非线性动力学行为, 利用周期性极化铌酸锂晶体中准相位匹配线性电光调制, 本文提出了一种新的操控方案并且探索了其控制规律. 研究结果发现, 受到平行光注入或正交光注入的副激光器输出偏振度随外加电场成周期性振荡变化, 其振荡波峰轨迹包络曲线为正弦曲线, 而振荡波谷轨迹包络曲线为余弦曲线; 选取一定的主激光器偏置电流, 通过对来自主激光器的光进行电光调制, 受到两种方式注入的副激光器可以输出任意偏振模, 并且其非线性动力行为经历不同的演变. 另外, 副激光器的偏振度仅依赖于外加电场, 与副激光器的偏置电流无关.     

多横模垂直腔面发射激光器及其波长特性

基于氧化限制型内腔接触垂直腔面发射激光器(VCSEL) 结构设计, 研究了VCSEL的多横模分布及其模式波长分裂特性与氧化孔径尺寸、形状的关系. 在实验基础上, 通过建立有效折射率模型, 并利用标量亥姆霍兹方程的迭代算法理论, 分别对椭圆形氧化孔径和圆形氧化孔径VCSEL的横向模式特性进行模拟研究, 计算得到不同形状孔径的多横模光场分布情况, 同时测量得到高阶横模多频输出光谱. 研究发现, 椭圆氧化孔形状不仅影响横模分布特性, 还会导致每个模式的波长产生分裂, 分裂值可达0.037 nm. 同时, 随着氧化孔径的增大, 波长分裂影响会逐渐减小, 直至趋近于圆形氧化孔径的分布特性. 研究结果为进一步实现氧化限制型VCSEL的多横模锁定提供了有益参考和借鉴.     

Self‐Assembled Binary Mixtures of Partially Etched Nanowires

Arrays of anisotropic particles are sought after for applications in optics, electronics, and energy. Structures assembled from multiple micro‐ or nanoparticles could incorporate the distinct properties of each component to achieve functions not possible from single‐population assemblies. In mixed‐particle populations, the assembly forces may differ between the particle types, which will in turn influence the final assembled structures. Here, binary particle mixtures are studied and compared to assemblies formed from each of the component particles alone. The particles are partially etched nanowires (PENs, ≈300 nm diameter, and 3–8 μm overall length), which are formed by the silica coating and subsequent etching of striped metal nanowires, such that what remains are silica nanotubes containing segments of metal core (Au, Pt, Rh, or Pt/Au) with controllable location and number, spaced by “empty” regions that fill with water. Binary mixtures of PENs with different core metals and segment patterns are examined here to explore how the different core segment material, length, position, and number affects overall self‐assembly behavior.     

Characteristics of Friedel pairs and diffraction contrast tomography with non‐perpendicular rotation axis

The characteristics of Friedel pairs in diffraction contrast tomography (DCT) are studied in the condition that the rotation axis of the sample is not exactly perpendicular to the incident X‐ray direction. For the rotation axis approximately aligned along the vertical direction, the Friedel pairs close to the horizontal plane are insensitive to the non‐perpendicularity of the rotation axis, and can be used to refine the sample‐to‐detector distance and X‐ray energy, while the Friedel pairs close to the vertical direction are sensitive to the non‐perpendicularity of the rotation axis, and can be used to determine the rotation axis orientation. The correct matching proportion of Friedel pairs decreases with increasing non‐perpendicularity of the rotation axis. A method of data processing considering rotation axis misalignment is proposed, which significantly increases the correct matching and indexing proportions of the diffraction spots. A pure aluminium polycrystalline sample is investigated using DCT at beamline 4W1A of Beijing Synchrotron Radiation Facility. Based on the analysis of Friedel pairs, the sample‐to‐detector distance and X‐ray energy are refined to be 8.67 mm and 20.04 keV, respectively. The non‐perpendicular angle of the rotation axis is calculated to be 0.10°. With these refined geometric parameters, the matching proportion of the spatial position of diffraction spots is 90.62%. Three‐dimensional reconstruction of the sample with 13 grains is realised using the algebraic reconstruction technique. It is demonstrated that the precise correction of the orientation of the sample rotation axis is effective in DCT suffering from rotation axis misalignment, and the higher accuracy in determining the rotation axis is expected to improve the reconstruction precision of grains.     

Experimental Investigation of Natural Convection in Inclined Channel in Presence of Electrostatic Field

The influence of external electrohydrodynamic forces on natural convection from a flat plate has been studied. Temperature distribution in the aforementioned channel at α = 45°, 90°, and 150° angles in different 10-, 12-, and 15-kV electrostatic fields has been reviewed. Corona wind and the shape of the created vortex by electrohydrodynamics were detected. The results showed that heat transfer was enhanced by increasing the electrostatic field in all angles. In the presence of the field, enhancement of heat transfer of the plate at acute angles is better than for obtuse ones. The optimal angle in terms of heat transfer was 45°, noting heat transfer improvement by 61%.     

大型砂尘风洞中砂尘浓度测量与控制方法的研究

砂尘浓度指标严重影响砂尘风洞试验效果;在大型砂尘风洞中准确的测量及有效的控制砂尘浓度是砂尘风洞设备研制中的两个关键问题;针对动态试验工况环境中浓度传感器标定的问题,分析了浓度测量时标定参数与风速和浓度的关系,使用模型树算法建立了三者之间的关系模型,以此模型来预测各种动态情况下的标定参数;针对复杂环境下浓度动态控制问题,采用专家PID算法,提出了多回路控制系统结构和专家规则;工程实践表明该测量和控制方法满足了动态试验环境的需求,取得了良好效果;模型树算法和专家PID系统能有效的解决动态工况下砂尘浓度的测量与控制问题。